Inspecting the Hygiene of Ventilation and Air Conditioning Systems in Accordance with VDI 6022

Hygiene of Ventilation and Air Conditioning Systems
Ventilation and air conditioning systems (in short RLT systems) serve to exchange and circulate the air in operating and recreation rooms. A rough distinction is made between ventilation systems, which always require a supply of fresh air, and recirculation systems, which treat and circulate the room air. In both cases, air handling systems contribute significantly to the indoor climate. After commissioning and at regular intervals of 2 - 3 years (depending on the type of system), operators are required to have hygiene inspections carried out by competent and independent third parties. The aim of these inspections is to determine the hygienic condition of an HVAC system for the health protection of persons.
VDI 6022 Sheet 1
The specific guidelines for the hygienic standards for HVAC systems have been described in VDI 6022 Sheet 1 since the year 1998. In summary, this document states that an HVAC system must not emit air that is of poorer quality than the air that is pulled into the system (exterior air or also interior air in the case of air circulation systems). This deterioration in air quality not only concerns inorganic particles (e.g. asbestos or mineral wool in older systems), but, first and foremost, contamination due to organic particles in the air, i.e. airborne microorganisms. Under the term of the microorganisms, without technical aids mostly not visible bacteria and molds are summarized. An increased microbial load of the ambient air with longer exposure can lead to lung diseases, allergies and other complaints. Microorganisms therefore pose a hygiene threat that should be taken seriously. The GBA Group has therefore developed into a competent, independent, and reliable service provider for all of your questions regarding the Hygiene inspections for HVAC systems. With our accredited asbestos analysis, for example, we determine whether your system represents a potential source of asbestos and mineral wool fibers (e.g. in the fire dampers). While our accredited mold laboratory determines whether your HVAC system has an increased microbial load. For this purpose, we identify, among other things, moulds from the relevant risk groups (e.g. in accordance with TRBA 460:2016).
Hygiene inspections
With a routine hygiene inspection, in most cases samples are taken through surface contact. Two different culture media, one for mold (DG18-medium) and another for bacteria and yeast (TSA-medium), are pressed onto a surface in order to detect the microorganisms present there. After a defined incubation time of two days for TSA or seven days for DG18, the colony-forming units (CFUs) are counted. When taking samples in this manner, it is important to test representative parts of the HVAC system. This includes, for example, a reference sample before the filters and components afterwards, such as the damper register, cooling battery, condensate tray, humidifier, ventilation chamber, droplet separator, air supply duct, air outlet, etc. Uneven or angled surfaces should be sampled according to VDI 6022 using sterile and moistened swabs. The most recent revision to VDI6022, published in 2018, requires not only surface contact and swab samples, but also direct testing of the indoor air. For this form of testing, the microorganisms in the air are isolated with the help of microbe collectors on culture media (DG18 and MEA). As opposed to contact or swab samples, it’s not enough just to count the CFUs for each surface. According to VDI6022:2018 Sheet 1, the molds that are present must be identified by an accredited laboratory, down to the genus and species if possible. In our accredited mold laboratory, we conduct precisely this kind of identification and demonstrate our ability to detect common indoor mold species regularly by participating in interlaboratory proficiency tests and other external audits.

Regarding aspects of category A air hygiene training in accordance with VDI 6022
In addition to our accredited laboratory for mold and asbestos analysis, we also have an experienced team that can provide you with competent support regarding aspects of category A air hygiene training in accordance with VDI 6022 Sheet 4. We will gladly consult you on the planning and execution of hygiene inspections. When all of the preparations have been completed, you will receive all of the necessary materials, sampling pumps (microbe collectors), and certified culture media for your project. After the sample-taking process is completed, you simply send it all back to use and then, after the required incubation time of seven days (DIN ISO 16000-17:2010), you receive a laboratory report on the hygienic state of your HVAC system as soon as possible.
You might also be interested in:
GBA Group Sites
For data protection purposes, your consent is required before loading the map.
learn moreGermany
Augsburg
Site page
Stätzlinger Str. 70
86165 Augsburg
Berlin-Adlershof
Site page
Magnusstraße 11
12489 Berlin
Berlin-Hoppegarten
Site page
Handwerkerstr. 24 d
15366 Hoppegarten
Fax +49 3342 21663
Bitterfeld
Site page
Lindenstraße 5
06749 Bitterfeld-Wolfen
Dessau
Site page
Kreuzbergstraße 146
06849 Dessau-Roßlau
Freiberg
Site page
Meißner Ring 3
09599 Freiberg
Fax +49 3731 163083-4
Gelsenkirchen
Site page
Bruchstraße 5c
45883 Gelsenkirchen
Hildesheim
Site page
Daimlerring 37
31135 Hildesheim
Krauthausen
OT Pferdsdorf
Kielforstweg 2
99819 Krauthausen
Fax +49 36926 71009-9
Merseburg
Site page
Jagdrain 14
06217 Merseburg
Fax +49 3461 27772-15
Mönchengladbach
Site page
Schelsenweg 24a
41238 Mönchengladbach
Munich / Vaterstetten
Site page
Johann-Sebastian-Bach-Str. 40
85591 Vaterstetten
Pinneberg
Site page
Flensburger Straße 15
25421 Pinneberg
Fax +49 4101 7946-260
Stuttgart
Site page
Julius-Hölder-Straße 20
70597 Stuttgart
Würselen
Site page
Schumanstraße 29
52146 Würselen
Fax +49 2405 4685-10
Austria
Salzburg
Site page
Schillerstraße 25
5020 Salzburg
Fax +43 662 433257-42
Poland
Łajski
Site page
Łajski, Kościelna 2a St.
05-119 Legionowo, Poland
Lublin
Site page
Doświadczalna 50a St.
20-280 Lublin, Poland
Leżajsk
Site page
Żeromskiego 3 St.
37-300 Leżajsk, Poland
Mysłowice
Site page
Fabryczna 7 St.
41-404 Mysłowice, Poland
Olsztyn
Site page
Trylińskiego 12/107 St.
10-683 Olsztyn, Poland
Poznań
Site page
Kopanina 59 St.
60-105 Poznań, Poland
Warsaw
Site page
Mochtyńska 65 St.
03-289 Warsaw, Poland
Warsaw
Site page
Ząbkowska 18 St.
03-735 Warsaw, Poland
Warsaw
Site page
Rydygiera 8 St.
01-793 Warsaw, Poland
Wrocław
Site page
Warciańska 41 St.
54-128 Wrocław, Poland
Finland
Oulu
Site page
Tyrnäväntie 12
90400 Oulu, Finland
Espoo
Metsänneidonkuja 6
02130 Espoo, Finland
Tampere
Mäntyhaantie 1
33800 Tampere, Finland
Kuopio
Microkatu 1
70210 Kuopio, Finland
Helsinki
Malminkaari 10
00700 Helsinki, Finland
Spain
Murcia
Site page
Poligono Industrial Oeste
Avda Principal 21/1
30169 San Ginés, Murcia, Spain
Sevilla
Site page
Polígono industrial San Nicolás
Calle San Nicolás Diez 46
41500 Alcalá de Guadaíra, Sevilla, Spain